DeWalt DWMT70775 Guide D'utilisation page 10

FEATURES
aDJusTaBLe poWer DIaL
The dial (I) controls the direc-
tion between forward and reverse
for driving or removing fasteners,
respectively. Point the dial to the
left for reverse, and to the right for
forward. The dial also controls the
three torque speed settings. The
torque increases with larger
circle settings.
sQuare DrIVe
The 3/8" square drive (a) allows
attachment of sockets with a
3/8" square drive.
TrIGGer
The trigger (B) allows the operator to
control the start
and stop of the air tool.
CoMposITe BoDY
The body of the air tool is a
high-impact composite design (F)
for reduced weight and superior
power-to-weight ratio. The composite body reduces fatigue and
provides insulation from cold air passing through the handle.
TWIn haMMer MeChanIsM
This air tool contains a twin hammer mechanism which provides
more durability and a longer tool life.
hanDLe
This air tool has an ergonomic grip (C) made of molded
thermoplastic elastomer (TPE) design for improved comfort,
slippage reduction, and better tool control.
R F
I
A
B
10
eXhausT
The exhaust (h) is located at the
base of the handle and allows the
exhaust to be directed away from the
operator and working area.
aIr InLeT
The tool's air inlet (D) located at
the bottom of the handle is used
for connecting an air supply with a
standard 1/4" NPT
American thread.
shoCK resIsTanT housInG
BuMpers
The shock resistant housing
bumpers (e) provide protection
against housing cracks from
accidental drops of the air tool.
H
D
E