Publicité
F
K
FIG. 2A
2) TO ATTACH SHELF:
(For 441Wa measure 1½" from the bottom of each leg.)
(For 442Wa and 445Wa measure 4" from bottom of each leg.)
Mark the location for a #6 x 1/2" Undercut Screw (F). The mark should be made on the same leg
surface that touches the short apron, slightly off center towards inner edge of leg. With the hole in
the 4 Hole 90° Bracket (K) over the mark insert a #6 x 1/2" Undercut Screw (F) and fasten securely.
See FIGURE 2A. Do this for all four legs. Now hold the Shelf(D) against the 90° brackets and fasten
the shelf to the brackets with #6 x 1/2" Undercut Screws (F). See FIGURE 2B.
Page 3 – 441Wa, 442Wa & 445Wa (Rev. 12/06)
FIG. 2B
F D
Publicité
