installing your dryer
TOOLS NEEDED FOR INSTALLATION
Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup,
adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer, you are
responsible.
Make sure you have everything necessary for proper installation.
1. A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
2. A POWER CORD for electric dryers (except Canada).
3. GAS LINES (if a gas dryer) must meet national and local codes.
4. EXHAUST SYSTEM – must be rigid metal or flexible stiff-walled metal exhaust ducting.
See the exhaust requirements on pages 8-10.
SEE DRYER EXTERIOR
Control panel
"Y"-connector
8_ installing your dryer
DV331AEW-03026B-03_EN.indd Sec2:8
DV331AEW-03026B-03_EN.indd Sec2:8
Door
Short inlet hose
Rubber Washer
Adjustable legs
Long inlet hose
2012-10-11
2012-10-11
5:49:21
5:49:21