Pressalit R8941 Manuel D'utilisation Et D'entretien page 16

Maintenance
Expected service life of the changing table is 9 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated.
It is recommended that service inspection is done once a year.
Maintenance inspection
Take the changing table to its highest position.
en
2
2
16
Disconnect mains before
performing service inspection.
1
3
2
2
• Check all electrical
connections to the
control box .
①
• Oil moving parts,
especially the sliding
brackets .
②
• Check the sink drain
for leaks (if a sink is
③
fitted).