Falcon HLTHDS100 Mode D'emploi page 5

• Switch off or unplug the ap-
pliance from the mains sup-
ply before carrying out any
maintenance work.
• Clean and/or replace the Fil-
ters after the specified time
period (Fire hazard).
- The Activated charcoal filter
is not washable and cannot
be regenerated, and must
be replaced approximately
every 4 months of operation,
or more frequently for particu-
larly heavy usage (W).
w
- The Grease filters must be
cleaned every 2 months of
operation, or more frequently
for particularly heavy usage,
and can be washed in a dish-
washer (Z).
z
• Clean the hood using a damp
cloth and a neutral liquid de-
tergent.
4. CONTROLS
Button Function
T1 Turns the Motor off.
T2 Turns the motor on at
speed one.
T3
Turns the Motor on at
speed two.
Press and hold for 2
seconds to enable
s h u t d o w n
a 30 minute delay
(Motor+Lights). It is
possible to change
the operating speed
when this function is
enabled.
T4 Turns the Motor on at
speed three.
Press and hold for 2
seconds to activate
I n t e n s i v e s p e e d ,
which is timed to run
for 6 minutes. At the
end of this time it will
automatically return to
the speed set before.
Suitable to deal with
maximum levels of
cooking fumes.
L Turns the Lighting
System on and off at
maximum intensity.
5. LIGHTING
• For replacement contact tech-
nical support ("To purchase
contact technical support").
ENGLISH
5
-
B u t t o n s
T1+T2 are
on.
B u t t o n s
T1+T3 are
on.
T h e
respective
w i t h b u t t o n s
T1+ (T2 or
T3 or T4)
will flash.
B u t t o n s
T1+T4 are
on.
The button
flashes.
Button on.