Publicité
Les langues disponibles
Les langues disponibles
troubleshooting
Owner's Manual |
dle
r.)
Insert one (1) AA battery (not
included) into the battery socket
with the positive terminal facing
nega-
out, then screw on the ignitor
button until tight. Be careful to not
over tighten.
osi-
rner
e.
e-
3-7mm
n of
Ensure that the ignition needle is
positioned 3-7mm away from the
burner tube, positioned above a
burner hole.
08
Assembly Guide
S t E P 0 3
another person, set the griddle
body on its feet.
Hook the propane tank hanger on
the left leg assembly, and secure it
using one (1) M6x70 bolt and one
(1) M6 nut.
S t E P 0 4
flat potion of the valve stems with the flat portion of the knobs. Push the
control knobs onto the unit until firmly sealed. Insert one (1) AA battery (not
included) under the ignition button.
S t E P 0 5
and (2) washers to install the paper
towel holder onto the paper towel
bracket peg.
With the help of
Place the four (4) control knobs on the unit by aligning the
Use one (1) M6x12 screw
Model 1984
Publicité
