Publicité
Les langues disponibles
Les langues disponibles
Owner's Manual |
dle
r.)
Insert one (1) AA battery (not
included) into the battery socket
with the positive terminal facing
nega-
out, then screw on the ignitor
button until tight. Be careful to not
over tighten.
osi-
rner
e.
e-
3-7mm
n of
Ensure that the ignition needle is
positioned 3-7mm away from the
burner tube, positioned above a
burner hole.
06
Assembly Guide
S T E P 0 2
Install the two (2) control knobs by pushing them into place in the OFF posi-
tion. Insert one (1) AA battery (not included) under the ignition button.
Place the griddle top onto the right side of the body. The four feet on the
bottom of the griddle top will fit into their corresponding holes.
S T E P 0 3
mometer to attach the thermometer to the hood. Use one (1) M4x12 screw
and one (1) M4 nut to attach the air vent to the hood.
Place the griddle body on its feet.
Use the wingnut screw and the washer preinstalled on the ther-
Model 1555
Publicité
