Philips Lumea BRI956 Mode D'emploi page 22

Skin type
I
II
III
IV
V
VI
Handling the device
Philips Lumea will automatically use the highest suggested intensity,
indicated by a continuous lighting led indicator.
Lumea gives you the freedom to select the light intensity that you find
most convenient. If you want to set the light intensity setting manually,
please consult the table below. This table shows settings that for the
majority of users provides a comfortable, but still effective setting.
5 Using Lumea should never be painful. If you experience discomfort,
reduce the light intensity setting. You can do this by using the up-down
buttons.
Note: The device automatically disables when your skin tone is too dark
(skin type VI), to prevent you from developing skin reactions. The 'ready
to flash' light will blink orange to indicate if the skin tone is too dark.
6 After moving to another body area or recent tanning, perform a skin test
to determine the right light intensity setting. To re-activate the setting
advice feature, press the magnifying glass symbol.
Note: Since body areas might differ in skin color, you need to select the
right setting for each body area separately.
Skin tone
White: you always sunburn,
never tan.
Beige: you easily sunburn, tan
minimally.
Light brown: you sunburn easily,
tan slowly to light brown.
Mid brown: you rarely sunburn,
tan easily.
Dark brown: you rarely sunburn,
tan very easily.
Brownish black or darker: you
rarely or never sunburn, very
dark tanning.
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note: Your skin may react differently on different days/occasions for a
number of reasons.
1 Before use, clean the attachment and the light exit window.
Light intensity setting
4/5
4/5
4/5
3/4
1/2/3
You cannot use the device
21
English