Publicité
Les langues disponibles
Les langues disponibles
Connecting the Battery
The UPS is shipped with the battery disconnected. The battery must be connected for the UPS to
operate; this should be done prior to connecting the UPS to AC mains or connecting any
equipment to the UPS. Follow the installation procedure below:
Remove Front Panel.
1
Connect Batteries.
2
Attach the connector as shown: black-to-black
and red-to-red.
Always ensure that the battery terminals
are properly secured.
Replace Front Panel.
3
18-02-242-93378D.indb 4
1
4 x screws
2
3
4 x screws
4
6/11/2018 3:36:46 PM
Publicité
