Publicité
Les langues disponibles
Les langues disponibles
Turntable Installation
- Never place the glass tray upside down. The glass tray
should turn freely.
- Both glass tray and turntable ring assembly must always
be used during cooking.
- All food and containers of food are always placed on
the glass tray for cooking.
- If glass tray or turntable ring assembly cracks or breaks,
contact your nearest authorized service center.
Countertop Installation
Remove all packing material and accessories. Examine the
oven for any damage such as dents or broken door. Do
not install if oven is damaged. Cabinet: Remove any
protective film found on the microwave oven cabinet
surface. Do not remove the light brown Mica cover that is
attached to the oven cavity to protect the magnetron.
INSTALLATION
1. Select a level surface that provide enough
open space for the intake and/or outlet vents.
A minimum clearance of 3.0 inches (7.5cm) is
required between the oven and any adjacent
walls. One side must be open.
• Leave a minimum clearance of 12 inches
(30cm) above the oven.
• Do not remove the legs from the bottom of
the oven.
• Blocking the intake and/or outlet openings
can damage the oven.
• Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause
interference to your radio or TV reception.
2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as
the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near
or over a heat source, the oven could be damaged and the warranty would be void.
The accessible surface may be hot during operation.
The temperature of accessible surfaces of the grill rack may be high when the appliance
is operating.
Hub (underside)
Glass tray
Turntable shaft
24
Turntable ring assembly
Publicité
