Bestron WINTER WARM AHH1200 Mode D'emploi page 21

OPERATION - General
The appliance is intended only for domestic use, not for
professional use.
1. Swing function button
2. Button heater below
3. Button heater above
4. On / off switch
5. Handle
6. Heating elements
7. Foot
OPERATION - Before first use
Remove the device from the packaging and remove all the packaging materials.
OPERATION - Assembly
1. Make sure that the heater's power cord runs through
the opening, with the plug at the bottom side of the
foot (See figure 2).
2. Use the two screws to mount the foot to the bottom of
the heater (See figure 2).
3. Place the power cord in the notch under the foot.
OPERATION - Use
1. Place the halogen heater on a stable surface and ensure that the grilles for the supply and removal of
the air are unobstructed.
2. Insert the plug into the plug socket.
3. Select one or more of the following functions:
On / off switch and middle heating element
Top heating element
Bottom heating element
21
1. 2. 3. 4.
EN
5.
6.
7.