CLAS PE 6000M Mode D'emploi page 32

PE 6001
PE 6000M
MOBILE SCISSOR LIFT DUAL CYLINDER LOW RAISE 3T MOVABLE ELECTRO HYDRAULIC LIFT
DESCRIPTION OF THE LIFT
How to use:
The lift is designed to lift any type of vehicle with a weight below 3000 kg and it is suitable to be
used for vehicle testing, maintenance and car cares. It is suitable for recessed or floor installation,
without the need for special structures.
Structure Features:
Scissor structured, equipped with holes for construction and anchoring on the ground.
The structure is designed to occupy as little space as possible.
Low voltage independent and movable control unit, with excellent safety level.
Hydraulic power factor correction
Equipped with safety valve and anti-theft system to prevent from overload or from the default
of the hydraulic system, in this way if the oil pump crashes, the lift platforms do not descend
suddenly.
Equipped with a lowering system of the platforms by the use of a manual pump for those
situations of absence of electric power.
Equipped with high quality elements Made in Italy & Germany.
Equipment:
Full Lifter
control unit
Frame:
Main lifting platforms and electro-hydraulic control unit for mobile control.
Control unit:
On the lift are the containment tank of the hydraulic oil, the hydraulic pump, the hydraulic oil valve.
The control panel is mounted on the control cabinet of the control unit.
On the mobile trolley is the reservoir for the hydraulic oil, the hydraulic oil valve. The control
panel is mounted on the control panel of the control unit.
Conditions of use:
The lift is designed to lift any type of vehicle with a capacity below 3000 kg and is suitable for use
in vehicle testing, maintenance and car care.
This model can easily be moved using the following optional
devices:
- 1 directional steering wheel
- 3 wheel brackets
32 32