Tv Display; Osd Language; Screen Saver; Divx Code - Teac DR-H300 Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TV Display

Because the shape of the television or monitor may not match
the shape of the movie frame, you may need to change the
way in which the image is displayed to avoid distortion on
older televisions, which use a 4:3 aspect ratio; high-definition
televisions use 16:9 (as do movies).
Note that you may need to read your television's manual in
conjunction with this section in order to achieve the best
results. Some discs do not allow the aspect ratio to be
changed and you will therefore have to change the aspect
ratio on the TV.
Make this setting while playback is stopped; you cannot do
this while playing back a disc.
4:3 PAN SCAN
This mode is used with 4:3 televisions. 4:3 images are
displayed normally. When showing 16:9 programs, the full
height of the screen is used, but the left and right part of the
image are cut off.
4:3 picture
4:3 LETTER BOX
This mode is used with 4:3 televisions. 4:3 images are
displayed normally. 16:9 images are visible at their full width,
but a blank area is left at the top and bottom of the screen.
4:3 picture
16:9
Use with a 16:9 wide television.
4:3 picture
< Some wide-screen discs that do not permit Pan & Scan mode
playback are automatically played in Letterbox mode.
< Depending on the DVD, 4:3 Letterbox may be selected
automatically instead of 4:3 Pan & Scan and vice versa.
< If WIDE is selected and a normal TV is connected, 16:9
content will appear distorted during playback (objects look
thin).
Settings (General Setup Page)
16:9 picture
16:9 picture
16:9 picture

OSD Language

Select the desired language for onscreen menus from the
following:
English (default), French, German, Italian, Spanish, Dutch
NOTE: If the unit is set to a foreign language and you find it
impossible to read the menu settings, you can restore all the
factory default settings, and the menus will appear in English
again (all other settings will be wiped out).

Screen Saver

ON (Default):
The screen saver starts up if nothing is played back and no
operations are performed for 3 minutes.
OFF:
The screen saver does not start up.

DivX Code

In case you need the registration code to play DivX files, select
this.
The registration code of the player will be displayed.
33

Publicité

Table des Matières
loading

Table des Matières