Schneider Airsystems D 040 138 Notice D'utilisation D'origine page 8

GB
KTP 310 ALU
Use with cartridges:
1. Unscrew the
(Figure 2).
2. Cut off the cartridge at the threaded
stem.
3. Screw on the threaded tip.
4. Operate without attachment (item 09).
5. Guide the cartridge into the housing
(item 04) (Figure 2).
6. Screw the union nut (item 05) tightly
(Figure 2).
Use with silicon puppets:
1. Unscrew the housing (item 04) from the
union nut (item 06) (Figure 3).
2. Remove the telescope piston (item 08)
and install the attachment (item 09) on
the front piston (Figure 5).
3. Assemble in reverse order.
4. Unscrew the
(Figure 2).
5. Insert the silicon puppet into the hous-
ing.
6. Cut the silicone puppet open at the front.
7. Inset the nozzle into the union nut
(item 05).
8. Screw the union nut (item 05) tightly
(Figure 6).
I/ 4
union nut (item 05)
union nut (item 05)
1.7 EC Declaration of Con-
formity
Cartridge gun
KTP 310 ALU
Year of CE mark: 2008:
We declare under our sole responsibility that
this product complies with the following
guidelines and standards:
DIN EN ISO 12100; DIN EN 792; 98/37/EC
(until 2009-12-28);
2009-12-29)
pp Marco Lodni
Head of Development/Testing
08.2008
Schneider Druckluft GmbH
Ferdinand-Lassalle-Str. 43
72770 Reutlingen
Serial no.
T460028
2006/42/EC (from