Publicité
Les langues disponibles
Les langues disponibles
• Do not use a steam cleaner to clean the product. The steam is under pressure and may condense on electrical
components on the device interior, causing short-circuiting.
• Do not use any strong or abrasive solvents or sharp metal scrapers as such products attack the surface and may
cause the glass to crack.
• The rotary controls must not get wet. Clean the rotary controls with a soft, damp cloth only.
• Clean the housing with a slightly damp cloth. Do not let any water enter the device interior.
• Use a damp cloth to clean the door, window, door seal, cooking chamber and all adjacent components.
• Use a soft cloth to wipe away any steam or drops that may build. Condensation may occur when moist air comes
into contact with a cold surface. Oil and grease also evaporate at high temperatures, before depositing as a greasy
film on surfaces after cooling.
• The glass tray may be removed for cleaning. Clean the tray in warm soapy water or in a dishwasher.
• The tray roller and the cooking chamber floor should be cleaned regularly to prevent excessive noise. Use a mild
cleaning agent to wipe down the surface.
• If you have removed the tray roller for cleaning, make sure to replace it correctly before further use.
• Neutralize any odors in the cooking chamber by filling a microwave-safe cup with water and lemon juice and
cooking it at full power for 10 minutes. Then dry the cooking chamber with a soft cloth.
14. Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
30
Publicité
