Publicité
Les langues disponibles
Les langues disponibles
b) Mains connection
Please ensure that the device voltage specified on the product corresponds with the available
power supply before inserting the plug. Do not plug in the product if the rated voltage does not
comply with the on-site power supply.
Connecting the device to an incorrect supply voltage may result in serious damage and hazards for
the user.
The mains socket that the device is connected to must be easily accessible so that the device may
be disconnected from the power supply quickly and easily in case of error.
Turn the product off before connecting to or disconnecting from the power supply.
Make sure that the mains cable is not pinched or damaged by sharp edges. Lay the cable so that no
one may trip on or become entangled in it. This poses a risk of injury.
Take care when handling mains cables and mains sockets. Mains voltage can cause fatal electric
shocks.
Make sure that the mains cable is undamaged and does not run beneath the product or across a hot
or sharp location. The power cord may not hang over the edge of a table or be pinched.
Connect the power plug to an appropriate power outlet.
c) General notes on operation
• Use the product only when the tray roller (5) and rotary tray (1) are in their correct position. Make sure that the tray
can rotate freely.
• Place the container holding the food you wish to heat in the middle of the glass tray.
• Always make sure the door locks into place when closing the door.
• The product turns on automatically once the time is set.
• When the cooking process has finished, an acoustic signal will sound.
• Make sure the product is switched off when removing food from the cooking chamber. The time dial (4) must be
turned to 0.
• When the product is not in use, turn the time dial to 0.
• Increase the time if you are defrosting foods and are unpleased with the results.
27
Publicité
