BASETech MW-BT20L Notice D'emploi page 26

10. Before first-time use
• Remove all packaging material.
• Check the delivery for completeness and transport damage.
• Clean the product.
11. Operation
a) Setting up the product
The product may not be placed in a cupboard.
Do not cover or block any openings on the product.
Prevent the product, the power cord or power plug from coming into contact with hot surfaces (e.g.
an oven). Never operate the product next to open flames. Keep highly combustible materials away
from the device.
Do not remove the product's legs.
• Due to its high weight, two persons are required to transport, unpack and set up the product.
• Choose a location out of the reach of children to set up the device to prevent their coming into contact with the
product's hot surfaces.
• Set up the product near a power outlet.
• Choose an even, horizontal and heat-proof surface for assembly. The surface must be stable enough to support
the weight of the product.
• When setting up the device, make sure there is sufficient ventilation. Keep a minimum distance of 20 cm above,
10 cm behind and 5 cm to the sides of the product.
26
20 cm
10 cm
5 cm
5 cm