Publicité
Les langues disponibles
Les langues disponibles
Note:
Once all attachments are in place, unwind a sufficient length of cable and insert the plug into the wall outlet. A
yellow mark on the power cord shows the ideal cable length. Do not pull the power cord beyond the red mark.
1. Insert the power plug into the wall outlet.
2. Press the on/off button located on the unit to turn the vacuum cleaner "on". To adjust the suction, move the
speed control button to control the suction power of the vacuum cleaner.
3. You can open the exhaust air valve (by sliding the cover) to reduce the suction force when cleaning upholstery,
rugs, light and movable objects. Normally the exhaust air valve should be closed to prevent the unnecessary
reduction of the suction force.
4. To rewind the power cord, press the cord rewind button with one hand and guide the power cord with the
other hand to ensure that it does not whip causing damage or injury.
CLEAN THE DUST BARREL
1. Press the button on the dust barrel arm.
2. Lift dust barrel up.
3. Press the button on low end of dust barrel to open the dust barrel cover.
Removing and cleaning of the motor filter and exhaust air filter:
Warning: Always unplug the unit from electrical outlet before getting out the dust barrel.
a. Motor filter
1. Press the button on the dust barrel arm.
2. Lift dust barrel up.
3. Pull up the buckle to open the cover.
4. Take out the motor filter for cleaning or changing.
Notes:
Make sure to dry the motor filter thoroughly before placing it back.
Never use the vacuum cleaner without a motor filter.
Buckle
- 14 -
Motor filter
Publicité
