My Arcade NANO PLAYER Manuel De L'utilisateur page 5

Playing on the Nano Player
1. Remove the battery cover located on the back of the console.
2. Insert 4 AAA batteries and replace the battery cover.
3. If you do not want to use batteries, gently insert the
(not included) into the power port (USB-C IN) located on the back of the console. Gently
insert the other end of the cable into a powered USB port. When using this option you do
not need to add batteries.
4. Move the power switch from o to on.
NOTE: High score does not save after the device has been turned o .
Battery information
Leakage of battery acid can cause personal injury as well as damage to this product. If
battery leakage occurs, thoroughly wash the a ected skin and clothes. Keep battery acid
away from your eyes and mouth. Leaking batteries may make popping sounds.
• Batteries should be installed and replaced only by an adult.
• Do not mix used and new batteries (replace all batteries at the same time).
• Do not mix di erent brands of batteries.
• We do not recommend using batteries labeled "Heavy Duty", "General Use", "Zinc Chloride",
or "Zinc Carbon".
• Do not leave batteries in the controller for long periods of non-use.
• Remove batteries and store them in a cool, dry place when not in use.
• Remove depleted batteries from the unit.
• Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends
are facing in the
correct direction. Insert the negative end first.
• Do not use damaged, deformed or leaking batteries.
• Do not recharge non-rechargeable batteries.
• Remove rechargeable batteries from the device before charging.
• Dispose batteries only at the government approved recycling facilities in your area.
• Do not short circuit battery terminals.
end of a
USB-C®
3
cable
USB-C®