Preventing the TV from falling
1. Using the appropriate screws, firmly fasten a set of brackets to the wall. Confirm that the screws are firmly
attached to the wall.
– You may need additional material such as wall anchors depending on the type of wall.
2. Using the appropriately sized screws, firmly fasten a set of brackets to the TV.
– For the screw specifications, refer to the standard screw part in the table under "Mounting the TV on a
wall".
3. Connect the brackets fixed to the TV and the brackets fixed to the wall with a durable, heavy-duty string,
and then tie the string tightly.
– Install the TV near the wall so that it does not fall backwards.
– Connect the string so that the brackets fixed to the wall are at the same height as or lower than the
brackets fixed to the TV.
<49-75 inches>
English - 10
<82 inches>