Télécharger Imprimer la page

Taurus HC-0150 Mode D'emploi page 24

Publicité

CLEANING:
- Disconnect the battery charger from the mains and allow it to cool
before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as
bleach, or abrasive products, for cleaning the appliance.
- Never submerge the appliance in water or any other liquid or
place it under running water.
- During the cleaning process, take special care with the blades, as
they are very sharp.
- If the appliance is not in good condition of cleanliness, its surface
may degrade and inexorably affect the duration of the appliance's
useful life and could become unsafe to us.
- To clean the blades, press button G, proceed to clean them using
the brush. For a deeper cleaning, press the inner pivoting blade.
(Fig.7).
- It is important to clean the hair after each use.
- Do not immerse the blades under the water.
- Once the appliance has been cleaned, add a drop of lubricating
oil to the blades and keep the appliance on for a few seconds.
ANOMALIES AND REPAIR:
- Take the appliance to an authorised technical support service
if product is damaged or other problems arise. Do not attempt
to disassemble or repair the appliance yourself as this may be
dangerous.
WARRANTY AND TECHNICAL ASSISTANCE
- This product enjoys the recognition and protection of the legal
guarantee in accordance with current legislation. To enforce your
rights or interests you must go to any of our official technical
assistance services.
- You can find the closest one by accessing the following web link:
http://taurus-home.com.
- You can also request related information, by contacting us (see
the last page of the manual
- manual and its updates at http://taurus-home.com.

Publicité

loading