Installing your television set
5 cm
5 cm
VOLUME
Quick installation
When you turn on the TV set for the first time,
a menu is displayed on screen.This menu
prompts you to select the country and language
for the menus:
Plug'n'Play
Country
GB
If the menu is not displayed, press the
to display the menu.
<>
& Use the
keys on the remote control to
select your country and validate with
If your country does not appear in the list, select
choice ". . . "
é Next select your language using the
≥
and validate with
.
& Positioning the television set
5 cm
é
PROGRAM
"
:
Language
English
key
MENU
≥
.
<>
keys
Place your TV on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat
source (e.g. lamp, candle, radiator). Do not
obstruct the ventilation grid at the rear.
Connecting the aerials
• Insert the aerial plug into the
rear of the set.
• Connect the power lead to the television and the
mains plug into the wall socket (220-240 V/50 Hz).
For connecting other appliances see page p.12.
Switching on
To switch on the set, press the
green indicator comes on and the screen lights
up. Go straight to the Quick Installation chapter.
If the TV remains in standby mode(red indicator),
press the
key on the remote control.
P -/+
The indicator will flash when you use the remote control.
" The search starts automatically.All the available
TV programmes and radio stations will be
stored. This operation takes a few minutes.The
display shows the progress of the search and
the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press
programme is found, consult the possible solutions p. 14.
' If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the installation
is complete.
( If this is not the case, you need to use the Sort
menu to number the programs correctly.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc.). In this
case, indicate your choice using the
≥
validate with
.
:
socket at the
key. A
POWER
. If no
MENU
<>
keys and
5