Publicité
VENTING YOUR PELLET STOVE INTO AN
EXISTING CLASS A 6" CHIMNEY SYSTEM
IMPORTANT:
IF YOU ARE INSTALLING YOUR PELLET STOVE AS
A REPLACEMENT TO AN EXISTING WOOD STOVE,
YOU CAN INSTALL YOUR PELLET STOVE USING
THE EXISTING CLASS A 6" VENTING SYSTEM.
1.
You must have the existing chimney system cleaned
and/ or inspected by a qualified chimney sweep
before proceeding with the installation of your pellet
stove.
2. To the right is an example of an installation using part
number 860001, 3-6" transition into 6" connector
pipe. The illustration is only an example. Please
conform to any local building codes or regulations
having jurisdiction before you have a qualified
installer proceed with this installation.
© 2023 United States Stove Company
Ceiling
Support
To Stove
10
INSTALLATION
Existing Class 'A'
6" Chimney System
Support
Bracket
3" to 6" Pipe
Adapter
3" PL Vent
Clean Out Tee
Publicité
