Nicols IP WASH 120 Manuel D'utilisation page 9

control. Direct input of DMX512 signal allows the units to be controlled from any DMX512 controller. This product can be operated as a
single unit or in multiple units for large applications.
Mounting:
-Hanging
The product can be mounted in a hanging position using the supporting bracket. The bracket should be secured to the mounting truss or
structure using a standard mounting clamp. Please note that when hanging the unit a safety cable should also be used.
-Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
-NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the angle of the product using the two
adjustment knobs located on the side of the fixture.
2. Technical Specification
IP WASH 120
LED PANEL 12X10W RGBW FC IP with barn doors
This product is designed for outdoor use. Suitable applications include wash or effect lighting for architectural, stage or nightclub
applications.
This product can also be installed for use in signage and advertising using the dynamic functions available with DMX512 controller. This
product can be operated as a single unit or in multiple units for large applications.
* Light source: 12X10W (RGBW 4 in 1 LED)
* DMX channel: 9
* Control: Auto, DMX, Master/Slave, musical
* IP rating: 66
* Beam angle: 35°
* Lifespan: 50 000 H
* Voltage: AC100-240V, 50/60Hz
* Size: 670 x 105 x 230 mm
* Net weight: 7,9kg
3. HOW TO CONTROL THE UNIT
DISPLAY PANEL MENU INSTRUCTION