FIRST-TIME OPERATION
Caution: Never operate the appliance unattended.
hot surface and get seriously burned. All gas appliances should be attended at all times.
Prior to using your appliance, verify that all of the following is correct:
The burner heads are free of any debris or obstruction.
Installation of the proper gas type and regulator settings.
The proper gas connection is complete.
Check for gas leaks.
Minimum clearances are maintained.
All packaging has been removed.
All parts and components are properly in place.
An installer-supplied manual gas shut-off valve is fully
accessible.
LP/NG hose is clean and inspected for cuts, wear, abrasion,
or leaks. Replace if necessary with a suitable UL, ETL or CSA
Listed part with internally threaded connector.
The surface is extremely hot and someone can touch the
BLAZE Instructional
Book Page | 28