Publicité
Les langues disponibles
Les langues disponibles
36.
Open the steam/hot water knob (4) and lift the pump switch (22) up.
37.
Hot water will flow out from the steam arm (6) immediately.
38.
Once you have got the desired quantity of water, repress the switch (22) down and close the steam/water
knob (4).
39.
After obtaining hot water from the arm (6), make sure that there is still water in the tank (1).
HOW TO SET THE BOILER'S TEMPERATURE BY MEANS OF THE PID:
The PID has been set by the producer of this machine on a temperature of 95°C. In order to change the temperature
please proceed as follows:
press the button
-
as soon as the display shows the boiler's temperature, help yourself with the buttons
-
order to set the desired temperature, starting from a min. of 80C° up to a max. of 130C°.
after 3 sec. from pressing the last button, the inserted temperature is memorized and the display shows the
-
set temperature.
NB: if the temperature is set too high, once a coffee request is made, the display starts to flash.
USEFUL TIPS:
The single cup filter basket (9) and the two cup filter basket (10) do not need to be washed after each use but
-
please check that the holes are not obstructed.
For best results, we suggest warming the cups up on the cup warmer (2) which works only when the machine
-
is on.
The PID (21) is already set by the producer on the right temperature for an excellent espresso. During heating
-
and coffee or water distribution, the temperature can oscillate (+/- 10/12°C). Also, a warning has been
inserted: after 108°C the PID's display shows the temperature but intermittently; this is normal and it warns
the user that the coffee will not be good if made with such high temperature.
CLEANING AND MAINTENANCE
Cleaning and maintenance of the machine are essential for the quality of the coffee and the durability of the
appliance.
Cleaning
The machine must be cleaned at least once a week.
Before starting, remove the plug from the electrical outlet and allow the machine to cool.
Use a soft cloth, preferably microfiber, like the Lelit cloth (code MC972 - not included), and moisten
it with plain water. Do not use abrasive detergents and do not immerse the machine in water.
For thorough maintenance, we suggest you use the Lelit brush (code PL106 - not included), which will help you clean
the nozzles and the spaces between the gaskets more effectively, removing stains and coffee residues from even the
smallest cracks.
Warm running water can be used to clean the removable parts of the machine. The filters and filterholder should
never be washed in a dishwasher.
There is no need to clean the filters after each use, but just to ensure they are not clogged.
However, to ensure the best performance from your machine, it is essential to thoroughly clean the steam wand and
filterholder after each use.
The filterholder should be cleaned to remove the greasy coffee residues that can negatively affect the taste of your
espresso.
Wash the exterior part of the steam wand with a damp cloth and release a little steam to remove any milk residues
from inside the tube, as these could obstruct the steam output, making it more difficult to froth milk properly.
Pagina 12
; as soon as the display shows the writing "PRG" press the button
English
;
and
in
Publicité
