OZ Lifting Products DYNO-HOIST 0.75 TON Manuel De L'opérateur page 3

IMPORTANT INFORMATION & PRECAUTIONS:
This manual contains general instructions dealing with the normal installation, operation and
maintenance of the products described herein.
This product should not be installed, operated, or maintained by any person who has
not read all the contents of these instructions. Failure to read and comply with these
instructions, warnings, or limitations noted might result in bodily injury, death, or property
damage. Contact the distributor for further explanation if information is not fully
understood.
It is the responsibility of the owner/user to install, test, maintain, and operate these products in
accordance with OSHA regulations, other federal, state, and local regulations, including:
ASME B30.21
AS1418.2
Only trained and qualified personnel shall operate and maintain this equipment.
Maintain Records:
Schedule and maintain records of regular inspection and maintenance of the product in compliance
with ASME standards. Record your hoists serial number on page 2 of this manual to allow for easier
referencing.
Precautions:
Do not use OZ Lifting products in conjunction with other equipment unless the system designer,
manufacturer, installer, or user has put the necessary safety devices in place.
Modifications to upgrade, re-rate, or alter these products should only be authorized by the original
manufacturer.
Hoists should be used for lifting loads only within their load ratings.
EN pg.3