Conceptronic CM3PVR Mode D'emploi page 31

ENGLISH
The remote control is used to control the unit. On the inside cover of this manual you will
find a picture of the remote control. The numbers of the buttons correspond with the table
below, to explain each function of the remote control.
Nr Button
1. POWER ( )
2. REPEAT
3. OUTPUT
4. COPY
5. CLEAR
6. AUDIO
7. TITLE
8. RETURN
9. , , ,
10. MENU
11. PLAY / PAUSE
12. VOLUME + / -
13. PREVIOUS (
14. REWIND ( )
15. 0 – 9
16. +10
17. 100
18. FAST FORWARD (
19. NEXT ( )
20. CHANNEL + / -
21. STOP ( )
22. RECORD
23. TIMER
24. ENTER
25. QUALITY
26. SUBTITLE
27. ANGLE
28. STORAGE
29. EDIT
30. MODE
31. DISPLAY
32. MUTE
* The options marked with a * are intended for DVD Playback functionality. This feature is
not available yet.
The DVD Playback functionality will be available in the future with a firmware upgrade.
Check www.conceptronic.net for new firmware releases.
Remote Control Explanation
Description
Turn the unit on or to standby mode
Change the Playback Repeat Mode
(Repeat One, Repeat Directory, Off)
Change the Output signal (Composite, Component, S-Video)
Display the Copy Menu
Clear the input / Delete the selection
Change the DVD Audio track *
Return to the DVD Title screen *
Return to the previous screen / channel
Navigation Keys: Navigate through the Menu's
Display the Main Menu
Start Playback / Pause Playback / Pause Recording /
Initiate Timeshift
Increase or Decrease the Volume
) Previous File / Track / Chapter / Picture
Rewind Playback
Menu Navigation / Direct channel entry
+ 10 Channels
+ 100 Channels
) Fast Forward Playback
Next File / Track / Chapter / Picture
Channel Up / Down
Stop Playback / Stop Recording / Disable Timeshift
Start Recording / Increase Record Time (+30 Minutes)
Enter the Record Scheduler
Confirm selection
Set the record quality
Change the DVD Subtitle *
Change the DVD Playback angle *
Change the Active Storage Device (HDD, USB, Card)
File Edit Menu
Switch between Tuner, AV & Playback
Display Channel information / File information
Mute the sound
31