EGO EA0820 Guide D'utilisation page 12

ASSEMBLY
WARNING:
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
recommended for use with this edger. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possibly serious personal injury.
WARNING:
the factory so that the arrow on the blade guard and the open side point away from the
operator. This ensures that cuttings and other debris are directed away from the power
tool and the operator.
UNPACKING
◾
This product requires assembly.
◾
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
◾
Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping
◾
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
◾
If any parts are damaged or missing, please return the product to the place of
purchase.
CONNECTING THE EDGER ATTACHMENT TO THE POWER HEAD
WARNING:
running or with the battery installed. Failure to stop the motor and remove the battery
may cause serious personal injury.
This edger attachment is designed for use with EGO Power Head PH1400/PH1400-FC/
PH1420/PH1420-FC.
The edger attachment connects to the power head by means of a coupler device.
1. Stop the motor and remove the battery pack.
12
EDGER ATTACHMENT — EA0800/EA0800-FC/EA0820/EA0820-FC
If any parts are damaged or missing, do not operate this product
Do not attempt to modify this product or create accessories not
Do not adjust the blade guard. The blade guard has been set at
Never attach or adjust any attachment while the power head is