LEGRAND 882 01 Manuel D'installation page 7

Learn scenario
Step 1: Start the learn phase (on the LEADER)
Press LEARN
Step 2: Add an actor to the scenario (on the ACTOR)
Press LEARN
Step 3: Record the scenario (on the LEADER)
Modification of a scenario
Step 1: Open the scenario (on the LEADER)
Press LEARN
Step 2 : Modify the state of an actor in the scenario (on the ACTOR)
Press LEARN
Step 3 : Record the scenario (on the LEADER)
Clearing a scenario
Clear all the scenarios linked with the command key (on the LEADER)
Press LEARN
Clear all the scenarios linked to this product (on the LEADER)
Press LEARN
Key
The indicator lamp
goes off
Press the command key
Press the command key
that is to be associated
Press LEARN
Press the command key
that controls the scenario
Press LEARN
or
To remove the product from
the scenario, go to step 3
Press LEARN
The indicator lamp
blinks slowly
that is to control
the scenario
with the leader
The indicator lamps of all the products go off.
The scenario is recorded.
The indicator lamps of all the products go off.
The scenario is recorded.
Press the command 5 s
key and hold it
down for 10 s
Press LEARN 5 s
and hold down
for 10 s
The indicator lamp
blinks quickly
7
To add a number of products
to the scenario, repeat
operations and
for each actor.
The indicator lamps of all the products
in the scenario blink.
Press the command key
that is to be associated
The scenario is cleared
Return the product
to factory configuration
The indicator lamp
flashes