Domo DO1029TP Mode D'emploi page 20

Les langues disponibles

Any injury or damage caused by failure to comply with these rules are at your own risk.

Neither the manufacturer, importer or the supplier may be held liable.

PARTS

Backing surface with non-stick Teflon coating

Removable adaptor with thermostat and indicator light

'Cool touch' handles

BEFORE THE FIRST USE

Remove all packaging materials and clean the appliance carefully before using for the first time (see

cleaning).

The appliance heats up during use, so place the appliance on a heat-resistant surface and never put it

on a plastic table or plastic tablecloth.

Make sure there is adequate ventilation around the appliance. Turn the teppanyaki plate on for 10

minutes without putting any food on it. There will be a small amount of smoke and a slight odour that

will disappear quickly. This is normal. Clean the teppanyaki plate with absorbent paper or a clean dry

cloth to remove any residue.

It is recommended that you grease the griddle with a small amount of oil when using it for the very

first time.

Make sure that sharp objects such as forks do not damage the special coating on the teppanyaki. Small

fragments could become loose and your appliance could get irreparably damaged. Always use the

wooden spatulas or a heat resistant plastic model.

USE

Set the thermostat to 0 and plug the adaptor into the appliance. Put the plug in the socket.

SETTING THE TEMPERATURE

You can set the temperature of the appliance as desired. The temperature ranges from

a minimum of (0) to a maximum of (5). A medium temperature is recommended.

This switch is also the on/off switch, and 0 is the off position.

Turn the temperature regulator to the desired position. The red indicator light will light

up to show that the appliance is in use.

DO1029TP

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.