Bresser TemeoTrend LB Mode D'emploi page 33

6. BELL / ALARM
6a) HOW TO SET AND ARM THE ALARM
To set an alarm,
1. Press [ALARM] once to display alarm time. If the alarm is disarmed,
the time will be displayed as "OFF".
2. Hold [ALARM] for two seconds, The hour digits will blink.
3. Enter the hour using [▼] or [▲].
4. Press [ALARM]. The minute digits will blink.
5. Enter the minutes using [▼] or [▲].
6. Press [ALARM] to exit.
7. Repeat the same procedure to set single alarm.
6b) ALARM FEATURE
• Weekday Alarm
The alarm sound will be activated and the icon will fl ash on weekday
when it is armed and the alarm time is reached.
• Single Alarm
The alarm sound will be activated and the icon will fl ash once when it
is armed and the alarm time is reached.
Once fi nished, it will be disabled automatically.
6c) HOW TO STOP AN ALARM
Press [ALARM] on the unit to stop an alarm.
33
GB/IE