Weather Forecast - Bresser TemeoTrend LB Mode D'emploi

2e) GETTING STARTED
Once batteries are in place for the remote unit, they will start transmit-
ting temperature readings at around 45 second intervals. The main unit
will also start searching for signals for about two minutes once batteries
are installed. Upon successful reception, the outdoors temperatures
will be displayed. The main unit will automatically update its readings
at about 45-second intervals. If no signals are received, blanks „
will be displayed. Hold [▼] for 2 seconds to enforce another search for
about 2 minutes. This is useful in synchronizing the transmission and
reception of the remote and main unit. Repeat this step whenever you
fi nd discrepancies between the reading shown on the main unit and
that on the remote unit.

3. WEATHER FORECAST

3a) WEATHER FORECAST
The unit is capable of detecting atmospheric pressure changes. Based
on collected data, it can predict the weather for the forthcoming 12 to
24 hours.
Indicator
displays on
the unit
Forecast
NOTE:
1. It is not necessary and not possible to adjust the altitude of the
weather station. After the initial start-up of the weather station, a fi rst
forecast will be made within the fi rst 24 hours of operation.
2. In periods of long stable weather conditions, it becomes diffi cult to
make a reliable forecast.
Slightly
Sunny
Cloudy
Cloudy
28
Rainy Snowy
"