Zephyr MWD2401AS Guide D'utilisation, D'entretien Et D'installation page 25

ZEPHYRONLINE.COM
Sensor Feature
The microwave drawer sensors automatically detect and adjust cooking settings for the contents
being cooked. This allows simplification of cooking or reheating without manually adjusting power
levels and cooking times.
NOTE: Do not use the sensor features consecutively on the same contents as it could become
overcooked or burnt. Allow the microwave drawer to cool for 5-10 minutes before using the sensor
feature again. If the contents remain undercooked after the countdown, use the TIME COOK button
for additional cooking.
SENSOR REHEAT
1. Press the SENSOR REHEAT button once. The screen will display "SELECT SENSOR FOOD TYPE 1-4".
2. Select either 1, 2, 3, or 4 from the number keys or repeatedly press the SENSOR REHEAT button to
rotate between the screen displaying "PASTA", "PIZZA", "PLATE," or "SOUP".
3. Press the START/PAUSE button for the microwave drawer to start sensing.
4. Once sensing is complete, the calculated cooking time will begin counting down. The alarm will
sound and the screen will display "FOOD IS READY" when cooking is finished.
Do not open the door during the sensing process or else it will be cancelled.
Once the calculated cooking time is displayed, the door can be opened to stir, turn, or
rearrange the contents. Close the door and press the START/PAUSE button to resume cooking.
MWD2401AS Use, Care, and Installation Guide
Display
Menu
Pasta PASTA
Pizza PIZZA
PLATE
Plate
Soup SOUP
Operating Your Appliance
Repeated Presses
1
1-4 serving (4 oz/serv)
2
3
4 1-4 serving (4 oz/serv)
Weight Range
1-4 slice (2 oz/slice)
1 serving
25