Publicité
Les langues disponibles
Les langues disponibles
EN Recovery-Stick, Getting started
For what purpose is the Recovery USB Flash-Drive used?
If the Windows user interface shows unrecoverable problems, the operating system can be
restored to its default state. Therefore, we recommend creating a backup with the Recovery
USB Flash-Drive after the initial setup. In case of serious errors in Windows it can be started
directly from the Recovery USB Flash-Drive and the operating system can be re-installed.
Creating a Backup on the Recovery USB Flash-Drive
This requires an external mouse and keyboard.
▪
Shut down the panel.
▪
Carefully remove the glass cover by drawing it towards yourself.
▪
Connect the Recovery USB Flash-Drive.
Start the panel with the On/Off-Button.
▪
Paragon starts from the Recovery USB Flash-Drive. The Main View is displayed.*
Connect a mouse.
▪
▪
Select "Create single backup".
The Back up Wizard starts. The next window shows the backup name and description.
In What do you want to back up, go to the "Disk/Partition" tab.
▪
Select the "Basic GPT Hard Disk 0" or "Basic MBR Disk 0".
▪
In Choose a target to create your backup on go to "External devices" and select "PARAGON
▪
(D :)".
A summary is shown.
▪
Click on "Finish".
The backup file is created.
When the creation is complete, select the On/Off icon in the upper right corner of the screen
▪
and select "Shut Down".
▪
Remove the Recovery USB Flash-Drive.
▪
Restart the panel.
▪
Attach the front glass.
Restoring the Operating System from the Recovery USB Flash-Drive
This requires an external mouse and keyboard.
Note:
All personal data stored on the panel and any additional software installed will be lost
when the operating system is restored.
▪
Shut down the panel.
▪
If this is not possible, carefully remove the glass cover by drawing it towards yourself and
switch off the panel manually. To do this, press the On/Off-Button approx. for 10 seconds until
8
Publicité
