MSI H67A-G43 Serie Mode D'emploi page 38

MS-7750 Mainboard MS-7750 Mainboard
Important
• If you do not have any EMI problem, leave the setting at [Disabled] for optimal system
stability and performance. But if you are plagued by EMI, select the value of Spread
Spectrum for EMI reduction.
• The greater the Spread Spectrum value is, the greater the EMI is reduced, and the
system will become less stable. For the most suitable Spread Spectrum value, please
consult your local EMI regulation.
Remember to disable Spread Spectrum if you are overclocking because even a slight
•
jitter can introduce a temporary boost in clock speed which may just cause your
overclocked processor to lock up.
▶ DRAM Voltage
This item is used to adjust the memory voltage.
▶ Overclocking Profiles
Press <Enter> to enter the sub-menu.
▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these items are used to save
the current settings, and you can to load the settings from the stored profile.
▶ OC Retry Count
When overclocking has failed, setting this item as [1, 3] will allow system to reboot
1/ 3 times with the same overclocked configuration. If overclocking has failed every
time, the system will restore the defaults.
▶ CPU Specifications
Press <Enter> to enter the sub-menu. The submenu shows the information of installed
CPU.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the installed CPU
technologies. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu.
▶ DIMM1~4 Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the informations of
installed memory.
▶ CPU Features
Press <Enter> to enter the sub-menu.
▶ Active Processor Cores
This item allows you to select the number of active processor cores.
▶ Limit CPUID Maximum
It is designed to limit the listed speed of the processor to older operating systems.
En-28