MS-7750 Mainboard
MS-7750 Mainboard
Back Panel
Mouse
Keyboard
USB 2.0 Port
▶
Mouse/Keyboard
The standard PS/2
▶
USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other
USB 2.0-compatible devices.
▶
USB 3.0 Port
USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate
up to 5 Gbit/s (SuperSpeed).
Important
If you want to use a USB 3.0 device, you must use the USB 3.0 cable to connect to the
USB 3.0 port.
▶
VGA Port
The DB15-pin female connector is provided for monitor.
▶
DVI-D Port
The DVI-D (Digital Visual Interface - Digital) connector allows you to connect a LCD
monitor. It provides a high-speed digital interconnection between the computer and its
display device. To connect an LCD monitor, simply plug your monitor cable into the DVI
-D connector, and make sure that the other end of the cable is properly connected to
your monitor (refer to your monitor manual for more information.)
Important
The VGA and DVI-D display interfaces on the mainboard are designed to serve as IGP
(Integrated Graphics Processor) used. If you installed a processor without integrated
graphics chip, these display ports will have no effect.
En-12
LAN
USB 3.0 Port
USB 2.0 Port
mouse/keyboard DIN connector is for a PS/2
®
VGA Port
Line-In
Line-Out
Mic
DVI-D Port
mouse/keyboard.
®
RS-Out
CS-Out
SS-Out