MV Agusta BRUTALE 675 2017 Manuel De Maintenance page 124

1.14.3. Replacing the high beam bulb
Remove the headlight from the bike as described at
§1.14.2.
Release the retaining spring of the high beam bulb.
Extract the bulb.
Detach the bulb connector.
CAUTION: Do not touch the bulb glass with
bare hands. If you do, clean the bulb with an
oil-free solvent.
Replug the bulb connector on the new bulb.
Insert the new bulb, making sure to correctly place its
timing references.
Reattach the spring.
Reassemble the headlight on the bike as described
at §1.14.2.
MAINTENANCE
- 43 -
1
1