MV Agusta BRUTALE 675 2017 Manuel De Maintenance page 112

1.11. Checking and lubricating the drive chain
To perform this operation, you must put the motorcycle
on the rear stand, upright on a horizontal surface and
with the gear in neutral.
q Checking the chain adjustment
WARNING: Before checking the chain adjust-
ment, contact a MV Agusta authorized centre
to verify that the value of the static setup of
the rear suspension is correct. Also make
sure that the chain is properly lubricated.
The axis of the chain lower portion must be at a distance
equal to the "X" value (see table) from the lower chain
guard. Manually turn the rear wheel and carry out the
check at several points along the chain. The distance
between the chain and the lower chain guard must
remain almost constant as the wheel turns. If, on the
other hand, the play on the chain varies considerably, it
means that some chain links are flattened, seized or
elongated. If the distance is greater than the indicated
value, have the chain adjusted by your local MV Agusta
dealer.
MAINTENANCE
Model
"X"
- 31 -
"X"
Brutale 675 Brutale 800
120 mm 116 mm
1
1