Publicité
Certificate No.:
IECEx FMG 20.0032X
Date of issue:
2023-06-04
EQUIPMENT:
Equipment and systems covered by this Certificate are as follows:
See Annex for Description
SPECIFIC CONDITIONS OF USE: YES as shown below:
1. The non-metallic parts incorporated in the enclosure may generate an ignition-capable level of electrostatic
charge. Upon installation, care shall be taken to avoid locations where the external conditions are conductive to the build-up of electrostatic
charge on such surfaces. Additionally, the equipment shall only be cleaned with a damp cloth.
2. The Model Midrics 1 (MIXS1) Weighing Indicator does not withstand a 500Vrms dielectric strength test between the circuits and the earth
ground. This shall be taken into account during installation.
3. The equipment shall not be used where UV light or radiation may impinge on the enclosure.
IECEx Certificate
of Conformity
Page 3 of 4
Issue No: 3
Publicité
