Publicité
Les langues disponibles
Les langues disponibles
1.10. checking and lubricating the drive chain
To perform this operation, you must put the motorcycle
on the rear stand, upright on a horizontal surface and
with the gear in neutral.
q checking the chain adjustment
WARnInG: Before checking the chain adjust-
ment, contact a MV Agusta authorized centre
to verify that the value of the static setup of
the rear suspension is correct. Also make
sure that the chain is properly lubricated.
The axis of the chain lower portion must be 116 mm
from the lower chain guard. Manually turn the rear
wheel and carry out the check at several points along
the chain. The distance between the chain and the
lower chain guard must remain almost constant as the
wheel turns. If, on the other hand, the play on the chain
varies considerably, it means that some chain links are
flattened, seized or elongated. If the distance is greater
than 116 mm, have the chain adjusted by your local MV
Agusta dealer.
MAIntenAnce
- 31 -
1
116 mm
1
Publicité
