POWER CONTROL
Remote-control type (SC08F60J, SC08F60Y, SC21F60J, SC21F60Y Series)
HOSE (SC07F60J, SC08F60J, SC21F60J Series)
1. ON/OFF (
) Button
- Press the ON/OFF button to operate the vacuum cleaner.
Press again to stop the vacuum cleaner.
2. Suction ( - ), ( + ) Button
- Press the ( + ) button to operate the vacuum to highsuction
power. Press the ( - ) button to operate the vacuum to low
suction power.
(ON) MIN →
MID
If no button is pressed for 30 minutes while cleaning, the safety device is activated and the
power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug
the power cord in again.
HOSE (SC07F60Y, SC08F60Y, SC21F60Y Series)
1. ON/OFF (
) Button
- Press the ON/OFF button to operate the vacuum cleaner.
Press again to stop the vacuum cleaner.
2. SUCTION (-/+) Button
- Press the [SUCTION (-/+)] button to increase or decrease the
suction power. Each time you press the button, you gradually
increase the suction power. After the suction power reaches its
maximum, the next time you press the button, you return the
suction power to its minimum.
(ON) MIN →
MID
3. BRUSH ON/OFF Button
- Press the [BRUSH ON/OFF] button to operate the UV Brush. Press again to stop the UV Brush.
If no button is pressed for 30 minutes while cleaning, the safety device is activated and the
power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug
the power cord in again.
MAX
→
MAX
→
English - 9
Handle Control
The cleaner is controlled by radio
frequency signals.
Handle Control
The cleaner is controlled by radio
frequency signals.