Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Possible Problem
The body of the
appliance is electrified.
Frost is forming in the
appliance.
The appliance makes
too much noise.
The drawer will not
close properly.
28
Possible Cause
The unit is not properly grounded.
The environment is too humid.
The ambient temperature is too low.
The drawer is being opened too
frequently.
The rattling noise may come from
the flow of the refrigerant, which is
normal. As each cycle ends, you may
hear gurgling sounds caused by the
flow of refrigerant in the appliance.
Contraction and expansion of the
inside walls may cause popping and
cracking noises.
The unit is not level or is touching
another appliance.
The appliance is not level.
The drawer gasket is not installed
correctly.
The gasket is dirty.
The shelves are out of position.
Refrigerator Drawers Use, Care, and Installation Guide
R E F R I G E R ATO R
S I N G L E & D U A L Z O N E
Solutions
Contact your local electrician
to test your electrical grounding
system.
The unit uses an 'auto-defrost'
system, under certain conditions,
manual defrosting may be
required. If frost builds up, you
can try running the refrigerator
on a warmer temperature
setting, minimizing the number
of times you open the drawer or
unplugging the unit to allow the
frost to melt.
It is normal that as each cooling
cycle ends, you may hearing
ratting or gurgling sounds caused
by the flow of refrigerant in the
appliance. The high efficiency
compressor may make a pulsating
or high pitched sound.
Some popping or cracking noises
are normal. They are caused by
expansion and contraction of the
inside walls due to temperature
changes.
Check to make sure the cooler is
level and that it is non in contact
with another appliance or
furniture.
Make sure the appliance is on a
level surface.
Make sure the drawer gasket is
properly installed.
Clean the drawer gasket.
Install the shelves correctly.
P R E S R V ™
D R AW E R S
Publicité
