Publicité
Les langues disponibles
Les langues disponibles
ZEPHYRONLINE.COM
Installation Clearance Requirements
When installing the refrigerator drawers under a counter, follow the recommended spacing
dimensions shown.
The recessed lower back section has a height of 7-5/8" and depth of 1" to accommodate the
electrical plug.
An installation next to a wall will require a minimum 1/4" clearance.
The cabinet should allow at least 24" for the width and 34" for the height to accommodate the
refrigerator drawers.
The power cable is located on the back right of the unit and has a length of 78-3/4" to
accommodate multiple outlet locations.
Once you are ready to install the unit, you must adjust the feet to level the refrigerator drawers.
An improperly leveled drawer may not close properly.
This refrigerator can be fully built-in to cabinetry and does not require any additional clearances
besides what is referenced below.
The installation should allow the unit to be pulled forward for servicing, if necessary.
Refrigerator Drawers Use, Care, and Installation Guide
Installation Instructions
17
Publicité
