Publicité
Les langues disponibles
Les langues disponibles
ZEPHYRONLINE.COM
Preset Temperature Modes
Pressing these buttons will activate their preset temperature setting. Their respective LED
indicator will illuminate and the display window will flash 5 times before the temperature sets.
The default temperature for each preset temperature can be adjusted by pressing the Increase
or Decrease Temperature buttons while the display is flashing. The default temperature and
adjustable temperature range is listed below for each mode.
If the preset temperature mode is enabled, pressing the Increase or Decrease Temperature
buttons will exit the preset temperature mode, allowing manual control over the temperature.
NOTE: For dual zone models, pressing one of the preset temperature modes once will activate
the upper zone, and the upper zone display flash 5 times before the temperature sets.
Pressing one of the preset temperature modes again while the display is flashing will
enable that mode for the lower zone.
Produce Mode
Default temperature: 39ºF
Adjustable temperature range: 36ºF - 41ºF
Beverage Mode
Default temperature: 34ºF
Adjustable temperature range: 34ºF - 40ºF
Wine Mode
Default temperature: 50ºF
Adjustable temperature range: 40ºF - 65ºF
NOTE: The refrigerator drawers is equipped with a memory function. If power is suddenly lost,
the previous setting will be saved, and the refrigerator drawers will return to this setting
once power is restored.
Demonstration Mode
In this mode, the compressor and fans never turn on but all other functions remain enabled. When in
Demonstration Mode, the "R" indicator light will slowly blink indicating it is in Demonstration Mode.
To enable or disable Demonstration mode, press and hold the Interior Light button and tap the
Decrease Temperature button twice. For dual zone models, use the left side Decrease Temperature
button.
Refrigerator Drawers Use, Care, and Installation Guide
Operating Your Appliance
23
Publicité
