KRUG+PRIESTER IDEAL AP140 PRO Mode D'emploi page 33

Control panel
On/off button
A
Filter replacement
F
indicator
Fan speeds
• Press the on/off button (A) to switch the air purifi er on or off.
• The air purifi er runs in automatic mode
adapts to the measured air quality. The worse the air quality, the higher the fan speed.
• Press the fan speed button (B) to exit automatic mode. The air purifi er now runs at
fan speed . Press again to increase the fan speed to
Press again to increase the fan speed to
• The turbo speed setting for fast purifi cation of the ambient air requires the air purifi er to run at
maximum capacity. This can only be selected manually.
Timer functions
Pressing the timer while the air purifi er is switched on activates the "switch-off timer"
set time, the air purifi er switches off:
• Switch the air purifi er on (on/off button A).
• Press the timer button (C) to activate the timer. Press repeatedly to increase the timer time:
(h)
  
lights up) to disable the timer function.
• The timer indicator counts the respective time with (
displayed.
Pressing the timer button while the air purifi er is switched off activates the "switch-on timer"
 after the set time, the air purifi er switches on.
Fan speed button
B
Fan speed indicator
G
Daylight sensor
J
. Each number lights up in turn. Press the timer button again (no number
Air quality indicator
E
Air quality sensor
L
IR receiver
K
. In automatic mode, the fan speed (G) automatically
, or to the turbofan speed
Countdown). The remaining time is

Timer button
C
Timer indicator
H
I
.
.
Quiet button
D
Quiet indicator
after the

33