Front Panel
1
2
3
INPUT (Channel One)
1
This 1/4" jack input will accept signals from a variety of acoustic and keyboard instruments.
LEVEL (Channel One)
2
Controls the Channel One 1/4" phone jack input gain.
LOW EQUALIZATION (Channel One)
3
An active tone control (shelving type +/-15 dB) for boosting or cutting the bass frequency range.
CAUTION: Excessive low frequency boost can damage the speaker.
HIGH EQUALIZATION (Channel One)
4
An active tone control (shelving type +/-15 dB) for boosting or cutting the treble frequency range.
CHORUS (Channel One or Channel Two)
5
Controls the level of the Chorus effect, which simulates the sound of 2 instruments playing together. When the knob is set
to '10', the Chorus/dry guitar ratio is 50:50.
CHORUS SELECT (Channel One or Channel Two)
6
A switch that selects Channel One or Channel Two for the Chorus effect.
BALANCED INPUT (Channel Two)
7
This combination jack will accept an XLR or a 1/4" input from a variety of acoustic and keyboard instruments as well as
microphones.
LEVEL (Channel Two)
8
Controls the Channel Two combination jack input gain.
LOW EQUALIZATION (Channel Two)
9
An active tone control (shelving type +/-15 dB) for boosting or cutting the bass frequency range.
CAUTION: Excessive low frequency boost can damage the speaker.
MID EQUALIZATION (Channel Two)
10
An active tone control (peaking type +/-15 dB) for boosting or cutting the Mid frequency range.
HIGH EQUALIZATION (Channel Two)
11
An active tone control (shelving type +/-15 dB) for boosting or cutting the treble frequency range.
REVERB (Channel Two)
12
Controls the amount of signal from Channel One and Channel Two sent to the Reverb circuit.
MASTER VOLUME
13
Controls the master volume of both channels combined.
HEADPHONE JACK
14
A headphone jack is provided for stereo headphones. This switching jack disengages the internal speaker when plugged
in.
4
5
6
7
8
9
10
11
8
12
13
14