Maintenance; General Maintenance - Ryobi P781 Manuel D'utilisation

 Press the power button to turn the light on.
 Connect one end of a USB cable (not provided) to your
USB device.
 Connect the other end of the USB cable (not provided) to
the USB dedicated charging port to begin charging the
device.
 The USB charging capability is active when the light is
turned on. It will remain active for charging for 4 hours
after the light has been turned off.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
CALIFORNIA PROPOSITION 65
WARNING:
This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects or
other reproductive harm. Wash hands after handling.
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION

MAINTENANCE

NOTE: ILLUSTRATIONS START ON PAGE 6
 If the light is turned off for 4 hours, the USB port will
deactivate. To continue using the light for charging, turn
the light on again.
 The light may then be turned off and used for an additional
4 hour charging period.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
NOTICE:
The LED cannot be replaced. Any attempt to replace the
LED may damage the light.
STORAGE
Store indoors in a dry, locked up place, out of the reach of
children, with the battery pack removed and USB devices
disconnected. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
5 – English