Publicité
Les langues disponibles
Les langues disponibles
EN
Fitting Kit
K308W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Clamps over rubber door frame mouldings
and body clips supplied with kit
Please check the rear of this manual for
information relating specifically to your
vehicle.
Fit Body Clip by pulling back both rubber
mouldings (1) and positioning Clip (2) as
shown.
Refit rubber seal.
Adjust the legs on the crossbar to that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body clip installed on the vehicle.
7
Publicité
