Makita XBU02 Manuel D'instruction page 7

CAUTION:
Do not place the blower on the ground
•
while it is switched on. Sand or dust
may enter from suction inlet, and they
may result in personal injury.
Hold the blower firmly with a hand and
perform the blowing operation by moving it
around slowly.
When blowing around a building, a big stone or
a vehicle, direct the nozzle away from them.
When performing an operation in corner, start
from the corner and then move to wide area.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched
•
off and the battery cartridge is removed
before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner,
•
alcohol or
deformation or cracks may result.
Cleaning
015483
From time to time, wipe off the outside of
the tool using a cloth dampened in soapy
water.
To maintain product
RELIABILITY,
maintenance or adjustment should be
performed by Makita Authorized or Factory
Service Centers, always using Makita
replacement parts.
the like. Discoloration,
SAFETY
repairs, any
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments are
•
recommended for use with your Makita
tool specified in this manual. The use
of
attachments might present a risk of
injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details
regarding these accessories, ask your local
Makita Service Center.
Makita genuine battery and charger
•
Shoulder belt
•
NOTE:
Some items in the list may be included
•
in the tool package as standard
accessories. They may differ from
country to country.
and
other
7
any other accessories or